Sec. 4C.4.3.C.2. | Los Angeles City Law Search

authorized representative, based on vehicle maneuvering requirements on the lot. 14. Mechanical Automobile Lifts & Robotic Parking Structures a. the stacking of two or more automobiles using a mechanical car lift or computerized parking structure is permitted. b. Mechanical and robotic automobile parking lifts must maintain the following dimensions between vertical supports or any obstructions: PARKING LIFT DIMENSIONS Dimension Parking Stall Type STANDARD COMPACT clear Width (min) 8'-0" 7'-0" clear Height (min) 7'-0" 6'-0" c. the platform of the mechanical lift on which the automobile is first placed shall be individually accessed and shall be placed so that the location of the platform and access to the platform meet all applicable requirements of Div. 4C.4. (Automobile Parking). d. the lift equipment or computerized parking structure shall meet any applicable building code requirements in Chapter IX. (Building Regulations), Article 9. (Green Building Code)of this code. e. All mechanical automobile lifts and robotic parking structures shall be subject to Sec. 4C.4.3.C.2. (Location of Parking Stalls). D. Measurement 1. Parking Stall Width the parking stall width shall be measured as the narrowest horizontal distance between opposite edges of a parking stall. 2. Parking Stall Depth the parking stall depth shall be measured as the horizontal distance measured perpendicular to the parking stall width from one edge of a parking stall to the opposite edge. A minimum parking stall depth shall be met for all portions of the parking stall width. | 4-77 [ FOrM - FrONt AGe - STANDARDS ] [ USe - DeNSit Y ] Div. 4C.4. (Automobile Parking) Sec. 4C.4.3. (Parking Area Design) Established by Ord. 188,418, Eff. 01/20/2025, Oper. 01/27/2025 City of Los Angeles Zoning Code Chapter 1A 3. Parking Bay Width the parking bay width shall be measured by the horizontal distance between opposite edges of a parking bay measured perpendicular to the drive aisle. 4. Parking Angle the parking angl