Sec. 3D.9.1. | Los Angeles City Law Search

ayed over the entirety of the window opening. b. Measurement In meeting symmetrical lite pattern standards, if a vertical line can be drawn through the window opening, and the pattern and shape on both sides of the line appear approximately identical, the window or windows are considered in compliance with the symmetrical lite pattern standard. Line of Symmetry Line of Symmetry   6. Horizontal Sliding Windows a. Standards When listed as "prohibited" in the applied Frontage District (Part 3B.), windows provided on applicable facades shall not include sashes that operate left to right or right to left. b. Measurement Horizontal sliding windows are identified as either present or absent. 7. Vinyl Windows a. Standards i. When listed as "prohibited" in the applied Frontage District (Part 3B.), window assemblies provided on applicable facades shall not contain frames, sashes, rails, styles, muntins, mullions, or grills with a vinyl exterior finish. ii. Other accessory window assembly components may be finished with vinyl products. b. Measurement vinyl windows are identified as either present or absent. D. Exceptions Ground story transparency standards do not apply to parking structure facades unless the applied development standards district requires the facade to be wrapped, see Development Standards District (Part 4B.). | 3-119 [ FORM - FRONTAGE - STANDARDS ] [ USE - DENSITY ] Div. 3D.9. (Transparency) Sec. 3D.9.1. (Ground Story) Established by Ord. 188,418, Eff. 01/20/2025, Oper. 01/27/2025 City of Los Angeles Zoning Code Chapter 1A E. Relief 1. Up to a 15 percent increase to the total allowed ground story transparent area may be granted in accordance with Sec. 13B.5.2. (Adjustment). 2. A deviation from ground story transparency dimensional standard up to 15 percent may be granted in accordance with Sec. 13B.5.2. (Adjustment). 3. Deviation from any ground story transparency standard may be granted as a variance in accordance with Sec. 13B.5.3. (Variance). | 3-120 [ F